Window replacement · Victoria 2026 prices

Window Replacement Cost on the Mornington Peninsula

Get a fast, honest price range for new windows, whether you’re after double glazing, timber, aluminium or uPVC. Add each window, choose a frame and glass, and the estimator works out a ballpark using typical 2026 Victorian installed prices.

$500–$900standard aluminium, single glazed, per window
$900–$1,800double glazed aluminium or uPVC, per window
$1,200–$2,500double glazed timber, per window

Window replacement prices in Victoria (2026)

These are typical supply-and-install prices for a standard window of about 900 × 1200 mm, including removal of the old window and making good. Larger windows, sliding doors and specialty glass cost more.

Window typeTypical installed priceBest for
Aluminium, single glazed$500 – $900Budget replacements, sheds, laundries
Aluminium, double glazed (thermally broken)$900 – $1,700Modern homes, large openings, low maintenance
uPVC, double glazed$900 – $1,800Best thermal value, coastal homes, noise
Timber, double glazed$1,200 – $2,500Character, period and coastal-style homes
Aluminium-clad timber$1,400 – $2,800Timber inside, low-maintenance outside
Retrofit double glazing (keep your frames)$350 – $800Sound timber frames, heritage homes
Secondary glazing$250 – $600Renters, heritage overlays, noise
Double glazed sliding door (1800 × 2100)$2,000 – $3,900Living areas opening to the deck

Prices include GST and are drawn from published 2026 Victorian and Melbourne price guides. A whole home of 10–15 windows usually lands between about $9,000 and $28,000 depending on frames and glass.

Window replacement cost estimator

Add each window you want replaced. Pick its style, frame and glass, then enter its size. The total updates as you go.

How to measure your windows
Width Height
  1. Measure the frame, not the glass. Go from the outside edge of the frame on one side to the other.
  2. Width: measure across in three places (top, middle, bottom) and use the smallest, in millimetres.
  3. Height: measure from the sill up to the head in three places and use the smallest.
  4. Count identical windows once and set the quantity, rather than adding rows.
  5. Close enough is fine. We measure every window properly before we quote.

Not sure what your windows are called? Tap a style to use it in the estimator.

Estimated window replacement cost*
$0*
Supplied and installed, including GST*
    Get an exact quote

    * Subject to conditions. This estimator gives an indicative price range only and is not a quote. It uses typical 2026 Victorian installed prices including GST, removal of old windows and standard making good. Your final price depends on a site measure and inspection, frame condition, access, wall construction, glass specification, bushfire attack level (BAL), heritage controls, any rotten framing or lintel repairs, and current material prices. BAL-40 and BAL-FZ windows are priced on request.

    Double glazed, timber or aluminium windows? The pros and cons

    Choosing new windows comes down to three decisions: the glass (single or double glazed), the frame (aluminium, timber, uPVC or a mix), and whether to replace the whole window or keep your frames. Here’s how each option stacks up for homes on the Mornington Peninsula, from salty beachside streets in Rye and Sorrento to the bushfire-rated hills around Red Hill and Arthurs Seat.

    Double glazing vs single glazing

    Windows are the weak point in most homes. The Australian Government’s Your Home guide says up to 40% of a home’s heating energy can be lost, and up to 87% of its heat gained, through windows. Double glazing puts two panes of glass in one sealed unit with an insulating gap between them. The Victorian Government notes that double-glazed windows reduce heat loss or gain by almost 30% compared with single glazing.

    Pros of double glazing

    • Warmer winters and cooler summers, with lower heating and cooling bills
    • Far less condensation, so less mould and rot on sills and reveals
    • Noticeably quieter, especially with acoustic laminated glass
    • Better security than a single pane
    • Adds comfort and appeal when you sell
    • May qualify for a Victorian Energy Upgrades discount when replacing single glazing

    Cons of double glazing

    • Costs more up front, usually about $150–$400 extra per window
    • Heavier glass needs a frame designed for it
    • A failed seal fogs between the panes and the unit must be replaced
    • Only performs as well as its frame; a plain aluminium frame still leaks heat

    Upgrade tip: Low-E coated glass with an argon-filled gap is the sweet spot for Victorian homes. It adds a little to the glass cost but makes a real difference in a Peninsula winter.

    Aluminium windows

    Aluminium is the most common window frame in Australia. It’s strong, slim and affordable, and it suits large sliding doors and modern designs. The catch is that aluminium conducts heat very well, so a standard aluminium frame loses a lot of warmth even with double glazed glass. A thermally broken aluminium frame has an insulating barrier built into it to fix that.

    Pros

    • Cheapest frame option to buy and install
    • Slim, strong frames suit big glass and sliding doors
    • Very low maintenance, with no painting
    • Won’t rot, warp or swell
    • Non-combustible, which helps in bushfire areas

    Cons

    • Poor insulator unless it’s thermally broken
    • Frames sweat with condensation in winter
    • Salt air attacks standard powder coat near the beach
    • Can look cold or “builder-grade” on character homes
    • Damaged powder coat can’t easily be repaired on site

    On the Peninsula: if you live close to the water, ask for a marine-grade powder coat or anodised finish, plus 316 stainless steel hardware. Standard finishes can start breaking down within years in direct sea air.

    Timber windows

    Timber is a natural insulator and has been used in Australian homes for well over a century. Quality hardwood or engineered timber windows suit weatherboards, period homes, coastal cottages and anything with a warm, crafted look. As carpenters, this is our home ground: we build, repair and replace timber windows across the Peninsula.

    Pros

    • Excellent natural insulation, so frames stay warm to touch
    • Beautiful, warm look that suits period and coastal homes
    • Can be repaired, re-puttied and repainted rather than replaced
    • Long-lasting: well-kept timber windows last for decades
    • Doesn’t corrode in salt air
    • Often required or preferred under heritage overlays
    • Renewable, low-embodied-energy material

    Cons

    • Highest up-front cost of the common options
    • Needs repainting or re-oiling every few years
    • Can rot, swell or stick if neglected
    • Thicker frames show slightly less glass
    • Bushfire-prone sites need species and designs rated for the BAL

    uPVC windows

    uPVC (unplasticised PVC) frames are multi-chambered plastic profiles reinforced with steel. They’re standard in Europe and are growing fast in Victoria because they insulate almost as well as timber for less money.

    Pros

    • Excellent thermal and acoustic performance for the price
    • No painting, rot or corrosion, so it’s ideal near the beach
    • Very airtight, especially tilt-and-turn designs
    • Usually supplied with double glazing as standard

    Cons

    • Bulkier frames than aluminium
    • Limited colours; dark colours can be pricier
    • Can’t be repaired or repainted like timber
    • Plastic look doesn’t suit every home
    • Check the BAL rating if you’re in a bushfire area

    Aluminium-clad timber

    Aluminium-clad timber windows have timber on the inside and an aluminium shell on the outside. You get the warmth and insulation of timber in the room with a weatherproof, low-maintenance exterior.

    Pros

    • Timber look and warmth inside
    • Very little outside maintenance
    • Top thermal performance
    • Some systems are tested to high bushfire ratings

    Cons

    • The most expensive option
    • Longer lead times from specialist makers
    • Still needs a marine-grade finish near the beach

    Retrofit double glazing and secondary glazing

    If your existing timber frames are sound, you may not need new windows at all.

    • Retrofit double glazing removes the single pane and fits a slim double-glazed unit into your existing sashes. The window looks the same from outside, which is why it’s popular in heritage areas. Expect roughly $350–$800 per window.
    • Secondary glazing adds a second glazed panel on the inside of the existing window, creating an insulating air gap. It’s the cheapest option at roughly $250–$600 per window, and it’s great for noise.

    Neither fixes rotten, warped or draughty frames, so we always check frame condition first. Often the best value is repairing sashes and retrofitting the glass rather than replacing everything.

    Side-by-side comparison

    FramePrice (double glazed)InsulationMaintenanceNear the beachLifespan
    Standard aluminium$800 – $1,500PoorVery lowNeeds marine grade20–30 yrs
    Thermally broken aluminium$900 – $1,700GoodVery lowNeeds marine grade20–30+ yrs
    uPVC$900 – $1,800ExcellentVery lowExcellent25–40 yrs
    Timber$1,200 – $2,500ExcellentRepaint every few yearsVery good30–60 yrs
    Aluminium-clad timber$1,400 – $2,800ExcellentLowGood with marine finish30+ yrs

    What matters on the Mornington Peninsula

    Salt air

    Homes in beachside suburbs like Mornington, Mount Martha, Rosebud, Rye, Sorrento, Portsea, Flinders and Shoreham get constant salt spray. Timber and uPVC don’t corrode. If you choose aluminium, insist on a marine-grade finish and stainless hardware in writing, and rinse the frames with fresh water a few times a year.

    Bushfire ratings (BAL)

    Much of the Peninsula’s hinterland, including Red Hill, Main Ridge, Arthurs Seat and parts of Mount Eliza, is bushfire prone. New windows there must meet Australian Standard AS 3959 for your site’s bushfire attack level, which can mean toughened glass, metal screens or specially rated frames. We’ll check your BAL before quoting.

    Heritage overlays

    Some older streets in Mornington, Sorrento and Flinders sit under heritage overlays. Changing a window’s look may need a planning permit, so retrofit double glazing or like-for-like timber replacements are often the easiest path.

    Rebates

    Through the Victorian Energy Upgrades program, Victorian households replacing single-glazed windows may get a discount on eligible double or secondary glazing installed by an accredited provider. Check eligibility before you sign.

    Not sure which is right for your home?

    We’re local carpenters, not a window factory, so we’ll tell you honestly whether to repair, retrofit or replace. We’ll measure every window, check frame condition, BAL and heritage controls, and give you a fixed written quote.

    Book a free measure & quote

    Window replacement FAQs

    How much does it cost to replace a window in Victoria?

    In 2026 most standard windows cost about $500–$900 installed for single-glazed aluminium, $900–$1,800 for double-glazed aluminium or uPVC, and $1,200–$2,500 for double-glazed timber. Size, glass, access and site conditions move the price up or down.

    Is double glazing worth it on the Mornington Peninsula?

    For most homes, yes. The Peninsula’s cold, windy winters and hot summer afternoons make windows a major source of heat loss and gain. Double glazing improves comfort, cuts condensation and noise, and reduces energy bills, and it may qualify for a Victorian Energy Upgrades discount.

    Are timber or aluminium windows better near the beach?

    Timber and uPVC don’t corrode in salt air, so they’re the safest choices for beachfront homes. Aluminium works well too, but only with a marine-grade powder coat or anodised finish and stainless steel hardware.

    Can I double glaze my existing windows?

    Often, yes. If your timber frames are sound, retrofit double glazing fits new double-glazed units into the existing sashes for roughly $350–$800 per window. Secondary glazing is another option, fitted on the inside of the existing window.

    How long does window replacement take?

    Most windows are made to measure, which usually takes a few weeks. Installation is quick: typically 2–4 hours per window, and a whole house can often be done in a few days with each room open for only a short time.

    Do I need a permit to replace windows?

    Like-for-like replacements usually don’t need a building permit. You may need approval if you change the size of an opening, if your home is under a heritage overlay, or if your site is in a bushfire area with a high BAL. We’ll check before work starts.

    Ready for warmer, quieter windows?

    Free measure and written quote anywhere on the Mornington Peninsula, from Mount Eliza to Portsea.

    Get a free quote

    Get A Quote!